WELDbraze All Purpose Brazing Flux Powder
A Copper and Brass Flux specially developed for the braze welding of copper, brass, bronze and the brazing of steel, etc.
WELDbraze All Purpose Brazing Flux Powder is particularly suitable for use with WELDbraze Low Fuming Bronze, WELDbraze Nickel Silver, Tobin Bronze and Silicon Bronze rods.
Directions for use:
Optimal results will be obtained when the flux powder is applied to a clean surface free of paint, oil and grease. Dip the heated end of the rod into the flux for a pickup as required, a quantity will adhere to the rod. Flux can be cleaned off after with wire brush and/or hot water.
Warning:
Avoid breathing fumes during brazing - use adequate ventilation.
Contains Boric Acid
Not to be used for any other purpose other than braze welding.
WELDbraze 303 All Purpose Brazing Flux Powder - SDS (29Oct21).pdf
