WELDarc® Annular Cutter Tungsten Carbide Tip Cutting Depth 35mm
| SKU | Description | |
|---|---|---|
WAC1235T | 12mm x 35mm | |
WAC1335T | 13mm x 35mm | |
WAC1435T | 14mm x 35mm | |
WAC1535T | 15mm x 35mm | |
WAC1635T | 16mm x 35mm | |
WAC1735T | 17mm x 35mm | |
WAC1835T | 18mm x 35mm | |
WAC1935T | 19mm x 35mm | |
WAC2035T | 20mm x 35mm | |
WAC2135T | 21mm x 35mm | |
WAC2235T | 22mm x 35mm | |
WAC2335T | 23mm x 35mm | |
WAC2435T | 24mm x 35mm | |
WAC2535T | 25mm x 35mm | |
WAC2635T | 26mm x 35mm | |
WAC2735T | 27mm x 35mm | |
WAC2835T | 28mm x 35mm | |
WAC2935T | 29mm x 35mm | |
WAC3035T | 30mm x 35mm | |
WAC3135T | 31mm x 35mm | |
WAC3235T | 32mm x 35mm | |
WAC3335T | 33mm x 35mm | |
WAC3435T | 34mm x 35mm | |
WAC3535T | 35mm x 35mm | |
WAC3635T | 36mm x 35mm | |
WAC3735T | 37mm x 35mm | |
WAC3935T | 39mm x 35mm | |
WAC4035T | 40mm x 35mm |
- WELDarc TCT Annular Cutter 35mm and 55mm Cutting depth.
***PROVEN TO LAST LONGER THAN HSS***
Features and Benefits:
WELDarc Tungsten Carbide Tipped (TCT) Annular cutters are available from 12-100mm. (some sizes indent only)
The TCT teeth allow the cutter to last longer that the HSS std range.
The TCT teeth offer faster cutting speeds than that of HSS.
Offers clean burr free holes.
Equiped with a spiral flute which helps with the swarf removal and making it virtually impossible to seize the cutter.
Less prone to breakage than standard HSS cutters.
For use on all materials but specifically designed to prolong life when using on hardened materials, such as Bissalloy and Hardox steels.
Suitable for stainless steels, high tensile steels including railway tracks.
For most type of industries, such as transport, structural engineering, including harden and wear resistant steels.
3/4" weldon shank
Please note there are 2 size pilot pins requried were cutting depth.
For 35mm cutting deptch
WACEPT35S WELDarc Annular Cutter TCT Pilot Pin 6.4x87mm Suits 12-17mm
WACEPT35 WELDarc Annular Cutter TCT Pilot Pin M8x90mm Suits 18-50mm
