Features and Benefits:
Blue Demon ER4130 Tig Wire is a low alloy, welding wire suited for welding very high strength low alloy steels as well as tool steels like AISI 4130, 4140, 4150 and 4340.
In some cases may be used to weld AISI 8620.
Also for joining steels of similar chemical composition, as well as for overlays where moderate hardness is required.
Normal preheat 200C. Inter-pass 430C.
After completion of welding a slow cool to prevent cracking. Final heat treatment will determine physical data.
Typical Applications:
Boilers
Piping
Power Generation
Valve Bodies
High Temperature Service Applications
Pressure Vessels
Shielding Gas:
100% Argon or Argon Helium
Typical Physical & Mechanical Properties:
Tensile strength MPa /1,000
Yield Strength/900
Elongation %/11
Typical Wire Chemisty:
C/.31
Mn/.52
Si/.25
P/.005
S/.005
Ni/.05
Cr/.92
Mo/.20
V/.004
Ti+Zr/.004
Al/.016
Cu/.21