MADE IN ITALY LOW ALLOYED WELDING WIRES
All Positional ER80S-G copper coated solid MIG MAG welding wire for Atmospheric Corrosion Resisting Steel
ER80S-G is suitable for structural weather resistant steel and weather-proof steel for example corten.
Mainly used for welding of structural exposed steel usually found on buildings, sculptures and bridges.
Excellent resistance to atmospherical agents thanks to the presence of Cu, Cr, Ni.
Classification:
AS/NZS 14341-A-G 50 4 C1/M21 Z3Ni1
SFA-AWS A5.28 ER80S-G
EN ISO 14341-A-G 50 4 C1/M21 Z3Ni1
EN ISO 636-A- W Z3Ni1
Applications:
Bridge construction
Civil construction
Sculptures
Containers
Shielding Gas: 100% CO2 or Argon +20-25% CO2
Typical Wire Chemistry % :
C/0.080
Si/0.80
Mn/1.40
P/0.020
S/0.0025
Ni/0.005
Cr/0.25
Ni/0.80
Cu/0.40
Mo/0.05
Al/0.020
V/0.030
Zr+Ti/0.15
Typical Charpy V-Notch Properties:
Impact Value: -40C@60J
Elongation: 22%
Tensile Strength: 630 MPa
Yield Strength: 550 MPa
