GalMax NPR (No Primer Required) Gloss White Galvanising Paint provides direct to metal corrosion protection, with or without primer, and dries to a smooth and durable rust fighting finish. It can be used extensively in the maintenance and restoration of damaged or worn galvanised metal, and for corrosion protection of steel/iron structures or equipment.
GalMax NPR offers excellent adhesion to most metals, and can be used on concrete and ceramics, as well as other interior and exterior surfaces. Common applications include radiators and industrial mufflers, roads and bridges, fences and pipes, metal roofs, and offshore rigs.
Note: For long-term and added protection on fresh welds or in coastal environments, priming the surface with GalMax 90 or GalMax 93 Cold Galvanising Paints or Zinc Oxide Primers (Grey or Red) is recommended prior to application.
Features and Benefits:
Durable and long lasting
Corrosion protection against moisture
400G Aerosol
Colour Gloss White
Application
Ensure the surface is clean, dry, and free of contaminants, removing all scale and rust as far as possible before application. Do
not use acidic rust converters or removers. Do not paint over loose or unsound surfaces.
Drying times are temperature dependent.
Aerosol: Invert the can and shake well for at least one minute. Shake often during use. Hold the can upright and angle the fan
jet for a horizontal or vertical pattern. Apply in even sweeping strokes approximately 250mm to 300mm from the surface.
Apply several light coats a few minutes apart rather than one heavy coat. After spraying, invert the can and press the nozzle
to clear the jet. If blocked, use fuse wire and mineral turps to clean the nozzle.
Application Conditions
Temperature 15oC to 40oC
Humidity 85% RH Max
Recommended Film Thickness 40m (1.6 thou)
Drying and Coating
Touch Dry* 5 to 10 minutes
Re-Coat* Approx. 2 hours
Top Coat Required No
Re-Coat with Water-Based Paints Yes, but not recommended
Re-Coat with Solvent-Based Paints Yes
Heat Resistance Once Dry Up to 100oC
*Times are dependent upon temperature and weather conditions
Coverage
Aerosol 2m2 per 400g can
Compatibility/Suitability
Iron - Steel - Wrought Iron - Galvanised Steel
Not Compatible
Duragal Zincalume Colourbond Aluminium, Copper and Stainless Steel.
TDS
