MADE IN ITALY All Positional Solid MIG/MAG Copper coated low alloy steel Welding Wire for High Strength Steels
ER110S-G is a 0.3Cr-1.5Ni-0.3Mo-alloyed, copper coated solid wire, for MIG/MAG of high strength steels with low-temperature impact toughness requirements.
Characteristic features include excellent start properties, trouble-free feeding at high wire speeds and lengthy feed distances,
a very stable arc at high welding currents; extremely low levels of spatter, low fume emission.` Capable of producing welds with 690 MPa (100 ksi)
tensile strength. Excellent for welding quenched and tempered steels and HY-80 base materials. Supports short-circuiting, globular, axial spray and pulsed
spray transfer.
Classification:
AS/NZS: 16834-B-G 78A 5U M21 G
A5.28/ASME SFA5.28 ER110S-G
EN ISO: 16834-A-G 69 4 M21 Mn3Ni1CrMo
(OLD AS/NZS: 2717.1:1996 ESMG-GM-W769AH)
All Positions
Interpass 120-180 Deg
Operating amps 1.2mm 220-320A
Operating volts 1.2mm 22-28mm
Copper coated low-alloy wire with Ni-CrMo suitable for single pass or multipass welding of low-alloy steels. It can be used also when good toughness characteristics in low temperature are requide.
Applications:
Structural steel
Transport industry
Heavy equipment
Earth moving
Crane repairs and fabrication
Weldox 700
Low alloy Steel and suitable for welding high
Tensile steels such as T1, Bisalloy 80,
AISI 4140.
Shielding Gas: Argon + CO2(M20,M21,M33)
Current and Polarity
DC+
Base Material to be welded
T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700, BISALLOY 80, WELTEN 80 etc.
Typical Welding Chemistry:
C/0.089
Si/0.60
Mn/1.60
P/0.015
S/0.015
Cu/0.25
Cr/0.30
Ni/1.50
Mo/0.30
Al/0,030
V/0.10
Ti/0.050
Zr/0.050
Typical mechanical properties of weld metal:
Tensile Strength 800 MPa
Yield Strength 750 MPa
Elongation 19.4%
Temp/-40C
